All the transformers are tested in our sophisticated in0house laboratory for routine tests and type tests conforming to National and International Standard Specification.
Our Test benches are equipped with software based control monitoring and reporting system- The system acquires various parameters on real time basis and analyse the data for the preparation of error free test reports.
|1||H.V. Testing Set 33 KV Voltage up to 66 KV Make: Zaren||1 No.|
Voltage Test 33 KV Voltage up to 66 KV Make: SE
Double Voltage Double Frequency Test Set 850 V. 150 Hz.
Meter 80 Amp. 600 V. to 1050 V.
Make - Gopal Electronics Ahmedabad
|4||Ratio Tester, Make : Zaren / SEV||2 Nos.|
Insulation Tester working volt 1000 V., 2000 V. & 5000 V. Ranges
50 to 5000 Megger Ohms & Infinity
|6||Multimeter Make: Motawani||1 No.|
|7||Capacitor for full load short circuit test||4 Nos.|
For back to back charging of transformer.
|9||Oil Testing Set up to 60 KV Make: SEV||1 No.|
|10||Resistance Tester [Digital]||1 No.|
|11||Tong Tester 0 to 10, 50, 250 – 260. 1000 Amp.||2 Nos.|
|12||Dimmer variable voltage 100 Amp.||1 No.|
|13||100 KVA Standby Transformer for back to back charging test.||1 No.|
|14||For Short Circuit Test 63 KVA 1200 V. Transformer with 100 KVAR Capacitor.||1 No.|
|15||All other instruments Wattmeter, Frequency meter, Power Factor meter, Ammeters, Voltmeters, and all type of Current Transformers.||Lump-sum|
Our manufacturing unit located at Tasgaon near Sangli is an ultra modern plant built on a "Green Field Site" for manufacturing of transformer from 100 KVA to 5 MVA in 11 / 22 /33 KV Voltage range.
We use the Electrolytic Grade Copper Conductor for primary and secondary windings.
We also use High quality pre-compressed insulation and interleaved type of construction to ensure uniform distribution to transients with pre-shrinkage treatment to ensure robust/reliable product.
the core coil assembly is dried by a Computer Controlled Vapour Phase Drying (VPD) process. This process achieves superior quality of drying and oil filling under vaccum.
Electric hoist overhead crane of 30 ton capacity for lifting the Assembly, transformer, tanking.
|1||18 KW capacity 8’ x 8’ Hot Air Oven 25 KW Capacity.||1 No.|
Ton mono rail with chain pulley block from 1 Ton to 20 Tons.
cutting press machine.
|4||Chain pulley block 3 Ton, 20 Ton Capacity.||2 Nos.|
|5||H.V. Coil Winding Machine 2’ & 6’ Bed Length.||2 Nos.|
|6||L.V. Coil Winding Machine 6” Bed Length.||2 Nos.|
|7||Transformer Oil Filter Plant 5000 Liter/hour.||2 Nos.|
|8||Welding Machine 300 Amp.
|9||Gas Welding kit.||1 No.|
|10||Drill Machine ¾” Capacity.||1 No.|
|11||Compressor for spray painting One H.P.||1 No.|
|12||Shearing Machine.||1 No.|
|13||Weight Balance 300 Kg. Capacity.||1 No.|
|14||Electronic Weight Balance 500 Kg. Capacity.||1 No.|
|15||All other workshop tools.||Lump-sum|
|Sr. No.||Description||Quantity||1||Open Land Area||20000 Sq. Ft.|
|2||Built Up Area||5000 Sq. Ft.|
After sales service team is geared up for responding to customers queries & problems "round the clock". We are fully equipped to carry out all kinds of maintenance work and our service engineers are well trained to guide the customers for proper handling, unloading, installation and commissioning.